-40%
Motul 106144 Synthetic 8100 X-Power 10W60 Hi-Performance Oil 5L Bottle
$ 29.82
- Description
- Size Guide
Description
Motul 106144 Synthetic 8100 X-Power 10W60 Hi-Performance Oil 5L BottlePart #
106144
x1 Container
TYPE OF USE
100% synthetic lubricant, specially designed for high performance cars with naturally aspirated, compressed or turbocharged engines.
Recommended for Aston Martin / Alfa Romeo GT séries / Lotus / BMW M Séries / Maserati / Ferrari V12 / TVR / Lancia / Jaguar / Audi R8 5.2L GT ...
Suitable for all kind of operating conditions and for all type of fuels : leaded or unleaded Gasoline, ethanol, LPG and Diesel.
Compatible for catalytic converters.
PERFORMANCES
STANDARDS:
ACEA A3/B4, API SM
The ACEA A3 / B4 and API SN standards requires from the lubricant an outstanding detergent / dispersant power, a better viscosity increase resistance against deposits, and high lubricating properties such as wear protection and high temperature resistance for better controlled oil consumption and perfect engine protection over the oil drain interval.
8100 X-power 10W-60 provides longer lasting protection in lower or higher mileage engines for a longer lifetime of the vehicle. Extra oil film thickness reduces oil burn off in the combustion chamber and helps preventing oil leaks. The outstanding fluid strength provides high engine protection and stable oil pressure over the drain interval.
RECOMMENDATION
Drain interval : Refer to manufacturers’ recommendations and tune to your own use.
MOTUL 8100 X-power 10W-60 can be mixed with synthetic or mineral oils.
Can be used on Diesel engines requiring performances.
Before use always refer to the owner manual or handbook of the vehicle.
PROPERTIES
Viscosity grade SAE J 300 10W-60
Density at 20°C (68°F) ASTM D1298 0.851
Viscosity at 40°C (104°F) ASTM D445 163.4 mm²/s
Viscosity at 100°C (212°F) ASTM D445 23.5 mm²/s
HTHS viscosity at 150°C (302°F) ASTM D4741 5.81 mPa.s
Viscosity Index ASTM D2270 174
Pour point ASTM D97 -36°C / -32.8°F
Flash point ASTM D92 242°C / 467.6°F
Sulfated ash ASTM D874 1.09 % weight
TBN ASTM D2896 10.1 mg KOH/g
